NEW RECUMBENT/TRIKE MODEL AVAILABLE.
We are working on the new ad now. The new system feature an improved wiring system, more display, throttle, and e-brake options, and improved programming.
If you would like to purchase the new recumbent/trike model please email us at firstname.lastname@example.org
The TSDZ2 Mid Drive Motor - Torque Sensing Pedal Assist: The harder you pedal - the harder the motor works with you. 4 levels of assist provide smoothly integrated power ranging from +36-300%, allowing you to conquer virtually any hill with ease. These kits retrofit most bicycles by replacing the bottom bracket & crankset assembly - to utilize the existing drivetrain & gears for maximum efficiency.
The VLCD-5 Display - w/ Throttle & E-brakes: The VLCD-5 is a larger, center mounted display with ports and wiring for a throttle, e-brakes, and an external handlebar mounted button panel. It also houses a USB port for charging your mobile device (installation/use of the throttle, e-brakes, and/or external button panel is optional).
Trike Model Extended Cables: Included with this model are extensions for the speed sensor and display button panel, as well as extended cables for the throttle and e-brakes. With everything plugged in, total cord lengths are as follows;
Motor Battery Cables - 22"
Motor to Speed Sensor - 62"
Motor to Display - 62"
Display to External Button Panel - 56"
Display to E-Brakes - 56"
Display to Universal Throttle- 56"
Assisted Speeds up to 20mph / 28mph (motor does not provide assist past programmed limit on model, 28mph being the maximum value - while you can set the motor speed limit higher on the 36v models, we recommend the more powerful 48v or 52v model for speeds up to 28mph)
Power Assist Ratio: 36%~300% (with 4 levels of torque sensitivity-to-power-output to choose from)
- Maximum Torque: 80/90/100 N.m
- Pedal Cadence Assist: 90/100/110/120 RPM
- Extended Cables for Trike Model
VLCD-5 Large Center Mount Display (w/ Handlebar Mount Control Panel & USB Port for Mobile Device Charging)
Throttle (the optional throttle is governed and will not put out as much power as the assist function - this is to increase longevity and reliability of the motor)
E-brakes (the optional e-brakes cut power to the motor when depressed)
Speed Sensor w/ Spoke Magnet (speed sensor attaches to the chainstay, and the magnet attaches to a wheel spoke)
Compatible w/ Optional Lighting/Cables (6v .5-1a lights can be controlled from the display - requires lights and a 'Y' split speed sensor with light wiring harness - not included with this kit)
Mid Drive Utilizes the Drive Train Gearing (for increased efficiency & optimal hill climbing ability)
Integrated 8 pin Controller (for better protection and less wiring clutter)
Easy Installation (The TSDZ2 Mid Drive Kits fit 95% of bikes with threaded JIS/BSA bottom brackets)
- Small & Lightweight: 8 lbs / 3.6 kg
The large center mount VLCD-5 controls are on the display as well as the handle bar mount panel ~ featuring +\- buttons to adjust the level of assist, a power button that doubles as on/off for the lights with a short press, and an information button to toggle the trip/odometer readout. You can also adjust the settings for wheel diameter, change the speed limit, switch between miles or kph, and more. The VLCD-5 also houses a USB port for charging your mobile device. The display screen is removable from the mount by pressing a tab underneat the USB.
This Trike Model includes a universal thumb throttle with an extended cable, but we can wire any throttle of your choice upon request.
Included stock with this kit are a pair of mechanical e-brakes (with extended cables) that cut motor power when depressed, so you never brake against your motor's power. We also offer compatible hydraulic e-brakes options - a highly recommended upgrade for superior stopping power when zipping around on your ebike. The use of the included e-brakes is optional, but you generally do want some sort of electronic cutoff if you are using a throttle as opposed to just the pedal assist.
Tongsheng offers 3 sizes of chain rings that fit its stock 110 BCD spider adapter; 34T, 42T, and 52T. You can also place a chain ring on each side of the adapter to make a 34/42T, or 42/52T dual chain ring. The TSDZ2 comes stock with the 42T, and matching chain guard (as seen in the motor pictures). The chain guard does not fit the 34T, or 52T chain rings. The smaller the tooth or 'T' count, the easier it is to pedal, and the larger the 'T' count, the higher your top speed. When in doubt which to order, count the teeth on your existing chain ring, and pick the closest size.
Note: The Stock 42T w/ Guard is dished/offset 5mm for a chainline of approx 51mm. With out the stock chainring, the chainline is approx 56mm on the inside, and 61mm on the outside if you have a double. These measurements are with a 68mm bottom bracket, not a 73mm, which would slightly differ.
THIRD-PARTY CHAIN RING SPIDER ADAPTERS:
If you prefer to use third-party 104 BCD or 130 BCD chain rings, you can use these spider adapters for compatibility with the TSDZ2. Like the stock 110 BCD spider adapter, you can also place a chain ring on both sides, making a dual chain ring.
Note: 104BCD and 130BCD Adapters DO NOT include chain rings
The stock blue plastic gear is a bit quieter than the metal gear, but if you ride aggressively at maximum power, at low RPM and high gear in hilly areas, or haul a trailer or heavy load, you may want to consider the metal gear.
The speed sensor attaches to your chain stay, and the spoke magnet screws onto a spoke to provide an accurate speed measurement. You must set the gap between the sensor and the magnet to right around 1/2" (12mm) and set your wheel size from the display. Start with a bigger distance, and then bring it closer just until you get a solid reading. Too close will scramble the reading. The Trike Model includes the standard speed sensor with an extension cable. You can upgrade to the 'Y' splitter speed sensor (pictured in the second thumbnail above) that includes light cables, for optional 5-6v lights controlled by the display.
Front and Rear Lights are available as an option if you don't want to wire your own. For the Trike Model, you have to purchase the Speed Sensor 'Y' Split w/ Light Cables. The lights/cables supply 6v .5-1a which is great for lights to increase your visibility to others, but not quite enough power for a strong headlight to light your way in the dark.
This Trike Model includes extended cables for the speed sensor, throttle, e-brakes, and vlcd-5 button panel. If needed, custom lengths are also available upon request.
The TSDZ2 Mid Drive Kits are designed to fit bikes with threaded JIS/BSA bottom brackets. This means a 68mm (2.68 in.) to 73mm (2.87 in.) wide bottom bracket shell (unless you have the 100mm TSDZ2 model, then 100mm is the desired measurement) and 35mm (1.37 in.) inside diameter. Known as JIS or Japanese Industrial Standard, which is very similar to our standard here in the US commonly referred to as "square tapered spindle", ISO/English, BSA, British, or "threaded". More than 95% of bikes with the correct measurement bottom bracket will work without a problem, but keep in mind, after 2012, a lot of higher end and full suspension bikes started utilizing other types of bottom brackets. PF30, BB30, Shimano and Press Fit 41 BB92 do have adapters on the market to make this motor compatible, but other style bottom brackets not mentioned are incompatible without custom machining.
36 Volt TSDZ2 Models require a 36v (up to 42v when fully charged) battery with at least 15a continuous discharge current.
48 Volt TSDZ2 Models require a 48v (up to 54.6v when fully charged) battery with at least 20a continuous discharge current.
52 Volt TSDZ2 Models require a 52v (up to 58.8v when fully charged) battery with at least 20a continuous discharge current.
To prepare, you need to have a compatible bare bottom bracket shell. If you are doing a conversion with an existing bicycle, you will have to first unhook the chain from your current chain ring, and uninstall and remove the complete bottom bracket assembly from your bicycle. For the VLCD-5 Display, you will need to remove any center mounted computer as well as your handlebar grips etc. as these will obstruct the Display Mount, Throttle, and E-brake installation. Once you are prepped for the install, the steps are as follows:
- Insert the TSDZ2 axle through the bottom bracket shell of your bicycle, and on the protruding side, slide the TSDZ2 mounting plate over the axle, then secure to the motor housing with the included bolts. If you have a 68mm bottom bracket, use the two included 5mm spacers, if you have a 73mm bottom bracket, you do not need the spacers. Fasten the included TSDZ2 lock ring over the axle, and tighten firmly with the included tongsheng wrench. Now, re-tighten the mounting plate bolts. Keep in mind, if this is a conversion, when putting your chain back on, you may need to add or take off some chain links for proper tension depending on the size of your old chain ring.
- Unscrew the bolt from the back of your VLCD-5 Display Mount, then slide the mount over the center of your handlebars, and re-tighten the hardware. The Throttle plugs into the middle port on the VLCD-5, and the E-brakes plug into the side ports. The external button panel has a corresponding plug on the display as well. Slide these all onto your handlebars and tighten the hardware.
- Connect the VLCD-5 8 pin cable to the corresponding plug on the motor, connect the power cables from the motor to your battery's discharge cables, and connect the TSDZ2 Speed Sensor cable to the corresponding plug on the motor. Take care not to bend the pins when connecting these.
- Fasten the Speed Sensor to your bicycle's chain stay with zip ties and secure the Spoke Magnet to your spokes. Ensure that the magnet lines up with the sensor arrow, and that there is a little gap in between them as well. The sensor is very sensitive, and will scramble the reading if the magnet is too close when it spins. Start with a bigger gap, and then bring it closer until you get a solid reading, looking for a final gap of around 1/2" or 12mm. You can also cover up the sensor with a chain stay cover, to additionally hide and protect it, and this will not inhibit the reading, or perhaps you may just have to move it a tad closer if anything.
- Connect the front/rear light cable to the 'Y' adapter on the speed sensor cable, and run the cables to the front/rear accordingly. Wire them to your lights however you choose.
- Power on your display/motor, ensure your speed sensor, lights and motor functions are operating correctly. Adjust your settings from the display as needed.
* Note - While TSDZ2 will function without the speed sensor or lights connected, it is highly recommended that you install them as is required by law in some areas.
Backed by our Eco Cycles Comprehensive Warranty and Extended Support Plan.
We have been working with Tongsheng for a while now, and we are proud to offer the latest and most exclusive TSDZ2 lines. We keep stock of items such as adapters, chain rings, etc, so if you need a part - we can get it to you quick! We also keep stock specifically for warranty and repair, offering supreme support for these units as we have developed extensive expertise in repair and service. We actually provide US service and repair for other International Tongsheng distributors as well! If you can't find what you need in our product documentation or instructional sections, feel free to contact us with any questions.
Most of the TSDZ2 models that leave the Tongsheng factory are 13a and the same couple models are commonly sold by distributors at multiple different wattage ratings ~ 350w, 500w, 750w. We program ours (ourselves) for 15a on the 36v models, 18a on the 48v and 17a on the 52v models - stronger than you can get anywhere else! We would rate the 36v15a @ 500w, and the 48v18a & 52v17a @ 750w - which is a realistic actual power rating for the TSDZ2. The 750w BBS models are rated with a bit of a deflated value, seeing how they peak over 1300w, while the TSDZ2 typically peaks under 1000w.
Why get a TSDZ2 compared to another mid drive, or hub motor kit?
Other mid drive kits on the market such as the Bafang BBS Series only use cadence speed sensing assist, which delivers a pre-set amount of power whenever you rotate the pedals. The torque sensing function of the TSDZ2 takes into consideration the force in which you are pedaling, and puts out a corresponding level of force accordingly. This is such a more integrated and smooth feeling when compared to the 'on/off speed sensors', making for a very enjoyable experience. As opposed to the hub/in-wheel motors when it come to tackling steep inclines - the mid drive kits utilize your bicycles gears for a much more efficient and capable riding experience. The hub motors also weigh down your wheel, affect handling, and are not very suitable for bicycles with suspension - not to mention making changing your tire a pain. Of course, this doesn't mean the TSDZ2 is always superior for every situation. Feel free to contact us with any questions regarding the pros and cons of this motor versus another on your planned build.